You must have javascript enabled to use this interactive worksheet.


Sabre Industries Sabre-FWT Sub Transmission Series
Designed for RUS Standard Pole Requirements
Pole Length: feet (120' Max) GROUND LINE DATA FIXITY POINT NEAR POLE TOP
Embedded Depth: + feet Above Ground Height Below Ground Line Pole Top Down
Embedment: feet feet feet feet


  Catalog Prefix  
(WPE Equiv)
  Sides     Top Dia.  
(in)
    Taper        Shaft Thk.  
  (in)  
    Load    
(lbs)
  Bottom  
Dia. (in)
STS - H10 12 11.8750 0.2500 11,000
STS - H9 12 11.7500 0.2500 10,000
STS - H8 12 11.0000 0.2500 9,000
STS - H7 12 10.5625 0.2500 8,000
STS - H6 12 10.5625 0.2500 7,125
STS - H5 12 10.0000 0.2500 6,250
STS - H4 12 10.0000 0.1875 5,450
STS - H3 12 9.7500 0.1875 4,700
STS - H2 12 9.4375 0.1875 4,000
STS - H1 12 8.0000 0.1875 3,375
STS - C1 12 8.0000 0.1875 2,825
STS - C2 8 6.5000 0.1875 2,325
STS - C3 8 6.0000 0.1875 1,875

  GL Dia.  
 (in)
GLM
  Capacity  
(ft-kips)
Req'd
GLM
  (ft-kips)  
1

Fixity
  Dia. (in)  
Moment
  Capacity  
(ft-kips)
1

  Near Pole  
Top
Dia. (in)
Moment
  Capacity  
(ft-kips)
1
Design Notes:
Up to 55; All poles are single piece.
60' Pole is 2-piece with 40'-0" top section
65' to 100' All poles are 2-piece with standard 47'-6" top section
105' to 120' All poles are 3-piece with standard 47'-6" top & same mid sections.
>120' or/and > H10 Contact Sabre-FWT Engineering.
"Near Pole Top" allows input of any elevation to determine the diameter and moment capacity.
The Fixity Point Below Groundline cannont exceed embedment depth.

Click here to go back to Standard Class Poles